不銹鋼門套廠家分享三種安裝方法
要用玻璃膠粘貼或者封邊,然后撕下白色的保護膜。安裝也快捷方便。今天小編為大家總結了一些安裝方法,一起來看看吧。
Paste or seal the edge with glass adhesive, and then tear off the white protective film. The installation is also fast and convenient. Today, I summarized some installation methods for you. Let's have a look.
1. 常規安裝方法:測量確認不銹鋼門的尺寸與安裝孔的尺寸相同,然后根據孔的位置放置鋼門,然后鉆孔,固定后調整。將內門放在門框上并鎖上,然后將側裝板固定在墻上。之后,外門框和安裝板以同樣的方式固定。
1. Conventional installation method: measure and confirm that the size of the stainless steel door is the same as the size of the installation hole, then place the steel door according to the position of the hole, drill, fix and adjust it. Place the inner door on the door frame and lock it, then fix the side mounting plate on the wall. After that, the outer door frame and the mounting plate are fixed in the same way.
2 .水泥填充法:因為不銹鋼門框基本是鏤空的,如果想要更堅固,可以用水泥填充門框的鏤空,但也要注意水泥不能填充太多,否則也會影響門框的開啟和使用。注滿水泥4小時后,取下墊紙,輕輕打開門扇,用螺絲刀將框孔內的水泥清洗干凈,然后蓋上安裝孔。
2. Cement filling method: because the stainless steel door frame is basically hollow, if you want to be more solid, you can fill the hollow of the door frame with cement, but you should also pay attention not to fill too much cement, otherwise it will also affect the opening and use of the door frame. After 4 hours of cement filling, remove the pad paper, gently open the door leaf, clean the cement in the frame hole with a screwdriver, and then cover the installation hole.
3.安裝方法:取下門扇,將門框放入門孔內,用水平尺檢查,平放。,內門合頁的一側是參考邊,將安裝板在門框加固上轉動,使其與門框垂直,然后用水泥釘將安裝板彎曲固定在墻上。
3. Installation method: take down the door leaf, place the door frame in the access hole, check with a level ruler, and lay it flat. First, one side of the inner door hinge is the reference side. Rotate the mounting plate on the door frame reinforcement to make it vertical to the door frame, and then bend and fix the mounting plate on the wall with cement nails.
以上就是為大家介紹的有關電梯不銹鋼門套的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://qihaobiandang.cn
The above is a detailed introduction to the stainless steel door pocket of the elevator. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://qihaobiandang.cn
下一篇:安裝門套有縫隙?教你一招上一篇:不銹鋼門套安裝過程